118
Run Prevent AFN 19
AFN: Run Prevent
19 Allow F/R
7 - PARAMETER DESCRIPTION
LCD Display
Range Allow F/R (Default)
No Reverse
No Forward
Description This function is to lock the direction of rotation. To lock the direction, select “No Reverse” or “No
Forward”.
Stop Key AFN 20
Loc/Rem Key AFN 21
AFN: Stop Key
20 Coast
AFN: Loc/Rem Key
21 Enabled
LCD Display
Range
LCD Display
Range Enabled (Default)
Disabled
Description This parameter is used to enable or disable the function of the LOC/REM key on the keypad.
See also Control (Loc/Rem) Button on page 54.
Parameter Value Description
Disabled The [STOP] key is disabled
Ramp A ramp-to-stop is performed
Coast (Default) A coast-to-stop is performed
Description This parameter sets the type of stop that occurs when the drive is running under terminal strip control and
the [STOP] key on the keypad is pressed
See also Keypad Messages, page 55 :”Kpd Stop”.
To Next Page
Loading...
Need help?
General
