BENSHAW RSi S4 Series - DRV Group Parameters Explained

76
Parameter Descriptions
Parameter Name MMM__
Jump to Parameter DRV 00
NomMtrAmps DRV 01
MMM: Parameter
MI Value
DRV: Jump Code
00 1 1
DRV:Nom Mtr Amps
01 x.x A
7 - PARAMETER DESCRIPTIONS
7.1 Parameter Descriptions
The detailed parameter descriptions in this chapter are organized in the same order as they appear on the
LCD display.
Each parameter has a detailed description that is displayed with the following format.
LCD Display
Description The description of the function
See Also Cross references to related parameters or other chapters.
LCD Display
Description By changing the value of this parameter and pressing [ENTER], you can jump directly to any
parameter within the group.
LCD Display
Description Model Dependent
Application Nominal Motor Amperage. This parameter congures the nominal motor current, and is obtained from
the nameplate on the attached motor.
This parameter is used to set the motor overload. See AFN 22 (TOL Select) on 118 130 .
z NOTE: Incorrectly setting this parameter prevents proper operation of the drive.
7.1.1 DRV Group