Embroidering preparation
22
2019-02 EN 5020070.00A.04
2 Embroidering preparation
2.1 Connection and Switching on
Connecting the machine
> Insert the power cable into the power cord connection.
> Insert the power cable into the power cord connection.
Use of the power cable (only USA/Canada)
The machine has a polarized plug (one blade wider than the other). To reduce the risk of electrical shock, this
plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not modify the
plug in any way!
Switching the machine on
> Switch on the machine at the main switch to «I».
Fixing the touchscreen pen
> Store the touchscreen pen on the top holder.
To Next Page
Loading...
