Bernette b70 DECO - Overview Embroidery Functions; Locating the Center of the Embroidery Motif; Center the Needle to the Embroidery Hoop

Embroidering preparation
39
2019-02 EN 5020070.00A.04
Overview Embroidery functions
1
2
3
4
1 Center the needle to the embroidery hoop 3 Grid on/off
2 Embroidery arm return 4 Motif center
Locating the center of the embroidery motif
The embroidery hoop is positioned so that the needle is exactly above the center of the embroidery motif or
the motif begin.
> Touch the icon «Embroidery hoop display/Embroidery hoop selection».
> Touch the icon «Center of the embroidery motif» to position the hoop so that the needle is placed
exactly over the center of the embroidery motif.
> Touch the icon «Center of the embroidery motif» again to position the hoop so that the needle is placed
exactly over the motif start.
Center the needle to the embroidery hoop
Relocating the embroidery hoop facilitates threading when the needle is close to the embroidery hoop.
đ
> Touch the icon «Embroidery hoop display/Embroidery hoop selection».
> > Touch the icon «Center the needle to the embroidery hoop» to move the hoop to the center.
> Thread the upper thread.
> Push the button «Start/Stop» to move the hoop back to its previous position.