Bernette b70 DECO - Machine Attachment and Maintenance; 8.1 Maintenance and Cleaning Guide

BERNINA CutWork Tool
67
2019-02 EN 5020070.00A.04
7.2 Start to cut
> Push the button «Start/Stop» and start to cut.
– When it is completed, the machine stops automatically and return to Embroidery menu display.
> Turn the CutWork Tool knife according to the cutting position on the display of Color indication (3).
> Repeat the same actions.
> When the cutting is completed, the machine stops automatically and shows the embroidery finished
screen on the display.