Bernette b70 DECO - Calibrating the Display; Back to Basic Setting

Setup Program
45
2019-02 EN 5020070.00A.04
Calibrating the display
Please find further information on this topic in the chapter attachment below troubleshooting at the end of
the instruction manual.
> Touch the icon «Setup Program».
> Touch the icon «Machine settings».
> Touch the icon «Calibrate the display».
> Touch the crosses in sequence using the touchscreen pen.
Back to basic setting
ATTENTION: Using this function will delete all individually made settings.
> Touch the icon «Setup Program».
> Touch the icon «Machine settings».
> Touch the icon «Default settings».
> Touch the icon «Default setting embroidery».
> Touch the icon «Confirm» and restart the machine to restore all default settings.