Bernette b70 DECO - Machine Setup Program; 3.1 Embroidery Settings

Embroidering preparation
40
2019-02 EN 5020070.00A.04
Embroidery arm return
The embroidery arm can be positioned to store the embroidery module.
đ
> Touch the icon «Embroidery hoop display/Embroidery hoop selection».
> Remove the hoop.
> Touch the icon «Embroidery arm return» the embroidery arm travels horizontally to the left to the park
position.
> Push the button «Start/Stop» to move the embroidery arm to the last position.
Grid on/off
When the center of the hoop and the grid are displayed, the embroidery motif can be positioned more
exactly.
đ
> Touch the icon «Embroidery hoop display/Embroidery hoop selection».
> Touch the icon «Grid on/off» to display the center of the hoop on the display.
> Touch the icon «Grid on/off» again to display the grid.
> Touch the icon «Grid on/off» again so that the center of the hoop and the grid disappear.