Attachment
68
2019-02 EN 5020070.00A.04
8 Attachment
8.1 Maintencance and cleaning
Cleaning the display
> Clean the display in the switched off status with a soft slightly damp mircrofiber cloth.
Cleaning the hook
CAUTION
Electronically driven components
Risk of injury near the needle and the hook.
> Raise the presser foot.
> Switch the machine off and disconnect it from the power supply system.
> Remove the presser foot and the needle.
> Remove the stitch plate.
> Clean the hook race with a brush.
To Next Page
Loading...
