Embroidering preparation
31
2019-02 EN 5020070.00A.04
Winding the bobbin thread
1 Spool disc 3 Thread pretension
2 Thread guide 4 Spool pin
> Place the thread spool and the appropriate spool disc on the spool holder.
> For small thread spools use the spool disc.
> In order to prevent tangling of the thread, please use a spool net.
> Guide the thread through the upper thread guide.
> Guide the thread around the thread pretension clockwise.
> Place the thread end through one of the inner holes and place the empty bobbin on the winding unit.
To Next Page
Loading...
