Attachment
74
2019-02 EN 5020070.00A.04
Message on the display Cause Repair
The bobbin thread is used up. > Remove the empty bobbin, fill it on the winder unit and
thread.
The needle threader lever is not
raised.
> Raise the needle threader lever.
The bernette USB stick (Optional
accessory) is not inserted
> Insert the bernette USB stick (Optional accessory) into
the USB stick socket.
Not enough free space available
on the USB stick (Optional
accessory).
> Delete the date on the USB stick (optional accessory).
> Overwrite the data on the USB stick.
Needle moves sideways. When the stitch plate is being changed, this picture appears
because the needle is likely to move.
The needle moves upwards. > Check that there are no other objects near the needle
plate.
> Touch the icon «Confirm» to raise the needle.
The hoop is not attached. > Attach the hoop.
The hoop is attached. > Remove the hoop.
To Next Page
Loading...
