Bernette b77 - Page 12

My bernette
9
2020-02 EN 5020077.20A.04
Operation buttons
Number Buttons Name Purpose
1 Quick reverse > «Keep Quick reverse» pressed to sew in
reverse.
> Touch the icon «Quick reverse» to sew
permanently in reverse.
«Quick reverse» doesn't work with the stitch
patterns 22-24 and with the buttonhole
patterns 51-71.
2 Thread cutter > Press the «Thread cutter» button in order
to cut the upper and lower threads
automatically.
2-6 securing stitches can be programmed in
the Setup-Program. These are sewn before
the thread is cut.
3 Presser foot up/
down
> Press the button «Presser foot up/down»
to raise the presser foot into hovering
position.
> Push the button «Presser foot up/down»
to raise the presser foot.
4 Start/Stop The button «Start/Stop» serves the purpose
to change the presser foot position and to
start the machine.
> To start the machine, keep the button
«
Start/Stop» pressed for 2seconds.
> Press the button «Presser foot up/down»
briefly to move the presser foot into
hovering position.
5 Needle up/down > Push the button «Needle up/down» to
lower the needle.
> Push the «Needle up/down» button again
to raise the needle.