Bernette DECO B70 - Attaching the Embroidery Module

Embroidery preparation
28
2022-08 EN 5020070.40A.04
2.3 Attaching the Embroidery Module
NOTICE
Transporting the Embroidery Module
Damage to the embroidery module connection and machine.
> Remove the embroidery module before transporting the machine.
> Make sure that the module and the machine are placed on a stable, even surface.
> Ensure that the embroidery arm can move freely.
> Lift the embroidery module on the left side.
> Carefully push the module from left to right into the embroidery module connection (1) of the machine
so that it engages.
1
> Hold the embroidery module, press the release button and pull it out.
2