Bernette DECO B70 - Machine Firmware Update; Firmware Version Check

Setup Program
50
2022-08 EN 5020070.40A.04
Updating the Machine Firmware
The machine's current firmware and detailed step-by-step instructions for the update process can be
downloaded from https://www.bernette.com Personal data and settings are automatically transferred during
a firmware update.
NOTICE
USB Stick (Optional Accessory) has been Removed too Early
Firmware has not been updated and the machine cannot be used.
> Remove the USB stick (Optional accessory) only after the saved data has been transferred successfully.
> Insert the BERNINA USB Stick (optional accessory), FAT32 formatted, providing the latest software into
the port.
> Tap «Setup Program».
> Tap «Machine Settings».
> Tap «Machine Data».
> To update the machine firmware, tap «Update».
Checking the Firmware Version
The firmware version of the machine is displayed.
> Tap «Setup Program».
> Tap «Machine Settings».
> Tap «Machine Data».