Embroidery preparation
34
2022-08 EN 5020070.40A.04
> To cut off excess thread, take the thread end and carefully pull it over the thread cutter. Please Note:
Use the right thread cutter only when threading.
> To thread the needle, lift the needle-threading lever. Keep the thread loose when doing so.
– The wire hook moves backwards and pulls the thread through the needle eye into a loop.
> Pull the thread completely through the eye of the needle.
Winding the Bobbin Thread
1 Spool Cap 3 Bobbin Winder Pretension
2 Thread Guide 4 Spool Pin
To Next Page
Loading...
