Embroidery preparation
35
2022-08 EN 5020070.40A.04
> To prevent slippery threads from catching or breaking, pull the spool net over the spool.
> Place the thread spool and the appropriate spool cap on the spool holder. Use the small spool cap on the
spool holder.
> Feed the thread through the thread guide.
> Guide the thread around the bobbin winder pre-tension in the direction of the arrow.
> Pull the end of the thread through one of the inner holes on the bobbin and place the empty bobbin on
the bobbin winding unit.
> Push the bobbin to the rigth-hand position.
– The button «Start/Stop» flashes and the display for winding appears.
To Next Page
Loading...
