Bernette DECO B70 - Display Brightness Adjustment; Display Calibration Procedure; Restoring Default Settings

Setup Program
49
2022-08 EN 5020070.40A.04
Calibrating the Display
Please find further information on this topic in the chapter attachment below troubleshooting at the end of
the instruction manual.
> Tap «Setup Program».
> Tap «Machine Settings».
> Tap «Calibrating the Screen».
> Touch the crosses in sequence using the touchscreen pen.
Back to basic setting
CAUTION: Using this function will delete all individually made settings.
> Tap «Setup Program».
> Tap «Machine Settings».
> Tap «Factory Setting».
> Tap the «Default Setting Embroidering», confirm and start the machine again.