Embroidery preparation
33
2022-08 EN 5020070.40A.04
> Guide the thread at the top from rigth to the left through the thread take-up lever and then down again.
> Guide the thread through the guides above the needle.
> Lower the presser foot.
> Press the threading lever down until it clicks into place.
– The wire hook goeas through the eye of the needle.
– To prevent damage to the threader, the presser foot is lowered automatically.
> Feed the thread around the thread guide.
> Guide the thread in front of the needle and underneath the wire hook and hold it.
To Next Page
Loading...
