112 Attaching the Embroidery Module
Attaching the Module to the Sewing Computer
Attaching the Module to the Sewing
Computer
• place the module on the sewing computer
behind the free arm
• push the module from the left towards the
sewing computer so that the connecting
lugs engage in the base plate
Caution!
When connecting the
embroidery module, attention
must be paid that all items are
on a flat and even surface!
Caution!
Always separate the module
and sewing computer for
transportation. Never
transport them attached.
Releasing the Cable
• the cable connects the module to the
sewing computer
• pull the cable out of the holder on the
back of the module
Connecting the Cable
• plug with flat side to the front
• insert the plug into the socket on the right
hand side of the sewing computer
Releasing the Cable
• pull out the plug
Storing the Cable on the Module
• insert the cable into both cable holders
•press cable gently to secure
Removing the Module
• grip the back right corner to lift the
module and remove to the left
To Next Page
Loading...
