30
Functions
Functions
Overview «Function»-buttons sewing computer
«Quick reverse»-button
secures the seam beginning and end: sews in
reverse as long as the button is pressed
used to program the buttonhole length
used to program the darning length
used to determine end of stitching in straight
stitch Securing stitch No. 5
used for securing in Quilters securing program
No. 1324
«Start/Stop»-button
starts and stops the sewing computer when
operating it with or without foot control
starts and stops the BSR-Function if the BSR
foot is attached and activated
«Automatic thread cutter»-button
upper and lower threads are automatically cut
2-6 securing stitches can be programmed in
the setup program. These are sewn before the
thread is cut
Speed control
sewing-/embroidery speed is infinitely variable
with the slide
«Needle stop»-button
⦁
touch button
►
the needle is raised or lowered in the same
way as by sinking the heel back on the foot
control
Programmable «Pattern end/Securing»-button
⦁
touch button before the sewing starts or
during sewing
►
single pattern is secured at the end, with the
selected number of stitches programmed
⦁
press button before or during sewing of a
combination
►
the active pattern of the combination is
secured at the end, with the selected number
of stitches programmed
⦁
the number and type of the securing stitches
can be programmed in the setup program
►
a stop symbol which appears during sewing
indicates that the function is activated
To Next Page
Loading...
