48
Setup Program
Calibrating the Display
⦁
touch the calibration icon
⦁
touch the center of the cross using a blunt pen
►
the cross moves to the next position
⦁
repeat this until all three positions shown are calibrated
►
the Display is closed
►
the calibration is saved
⦁
touch «Display calibration»-icon
Altering the acoustic signals
The Display calibration can be opened as follows:
⦁
turn off the sewing-/embroidery computer
⦁
touch the two needle positioning buttons on the front panel and
keep them pressed
⦁
turn on the sewing-/embroidery computer and release the
buttons as soon as the Display appears
By touching 1 the signals are activated or deactivated.
Selecting Stitch Pattern/Function/BSR
Stitch patterns and function selection 2 can be confirmed acoustically.
⦁
touch the icon 3 with the loudpseakers for the stitch patterns until you hear
the desired sound
There are six different sounds to choose from.
►
the sound is indicated by a number (1-6)
⦁
the sounds for the functions 4 and the sound for quilting with the
BSR 5 can be activated or deactivated in the same way
►
the deactivation is indicated as last option when scrolling through the
different sounds
⦁
touch «Acoustic signal»-icon
1
2
5
4
3
To Next Page
Loading...
