EasyManuals Logo

Beta ALP 4.0 User Manual

Beta ALP 4.0
81 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #46 background imageLoading...
Page #46 background image
3
CHECKS AND MAINTENANCE
125
GB
Rear brake
Check that oil is present by looking through
reservoir E. The oil level must never be
below the minimum level line in relief on
container F. For restoring the oil level pro-
ceed as follows:
Unscrew the oil container clamping
screw G.
Slide the container out of its lot.
Carefully keep the brake oil container in
a vertical position and open the cap.
Wrap it with absorbing paper as in the
figure.
Proceed with topping-up
ATTENTION:
The brake liquid is highly corrosive, so be
very careful not to let it drip onto the var-
nished parts of the vehicle.
WARNING
A spongy feel of the brake lever may be
due to an air bubble in the braking sys-
tem, in such case it is necessary to purge
the brakes (page 126/127) or revert to
an authorized mechanic as soon as possi-
ble.
Note
For information on oil renewals, please re-
fer to the chart on page 141. Use the rec-
ommended lubricants indicate at page 112.
E
F
G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Beta ALP 4.0 and is the answer not in the manual?

Beta ALP 4.0 Specifications

General IconGeneral
Displacement349 cc
Final DriveChain
Rear SuspensionMonoshock
Front BrakeSingle disc, 260 mm
Rear BrakeSingle disc, 220 mm
Front Tire90/90-21
EngineSingle cylinder, 4-stroke

Related product manuals