Beta RR 125 LC - Page 34

VALVES AND VALVE SPRINGS
• Valve “3”
• Valve spring “4”
• Upper spring seat “5”
(into the cylinder head)
T
IP
• Make sure each valve is installed in its original
place.
• Install the valve springs with the larger pitch “a”
facing up.
4. Install:
• Valve cotters “1”
5. To secure the valve cotters onto the valve
stem, lightly tap the valve tip with a soft-face
hammer.
NOTICE
ECA13800
Hitting the valve tip with excessive force
could damage the valve.
b. Smaller pitch
2
1