28
> Press/release the S (Select/Right) button to toggle between the
selections.
> Press/release the A (Advance/Left) button to accept the setting
and advance to Set HOUR FORMAT, or press/hold Both but-
tons for 2 seconds to revert to the SET 2 screen.
• Operation reverts to NORM SURF MAIN in 2 minutes if no
button is pressed.
SET HOUR FORMAT
Factory set for 12 Hour (12: AM to 11: PM), the Format can also
be set for 24 Hour (0: to 24: hours).
To access the Set Hour Format screen while viewing the SET 2
screen, press/release the A (Advance/Left) button 2 times (< 2 sec-
onds each time).
• The graphic Hour appears with 12 (or 24) flashing (Fig. 27).
> Press/release the S (Select/Right) button to toggle between 12
and 24.
> Press/release the A (Advance/Left) button to accept the setting
and advance to Set Time of Day, or press/hold Both buttons for
2 seconds to revert to the SET 2 screen.
• Operation reverts to NORM SURF MAIN in 2 minutes if no
button is pressed.
Fig. 27 - SET HOUR FORMAT
This same Set Units can
also be set in the SET
NAV Mode.
To Next Page
Loading...
Need help?
General
