68
CARE AND CLEANING
Protect your d.i.P from shock, excessive temperatures, chemical at-
tack, and tampering. Protect the Lens against scratches with an In-
strument Lens Protector. Small scratches will naturally disappear
underwater.
CAUTION: Never spray aerosols of any kind on, or
near, the instrument. The propellants may chemi-
cally attack the plastic.
• Soak and rinse the d.i.P in fresh water at the end of each day of
diving, and check to ensure that the areas around the low pres-
sure (Depth) sensor (Fig. 75a), PC Interface Port (Fig. 75b), and
Buttons are free of debris or obstructions.
• To dissolve salt crystals, soak the unit in a bath consisting of
50% white vinegar and 50% fresh lukewarm water.
• After removal from the bath, place the unit under gently running
water and towel dry before storing.
• Transport your unit cool, dry, and protected.
WARNING: Never force any object through any
slots or holes of the Housing. Doing so may dam-
age the Depth Sensor, possibly resulting in errone-
ous Depth readings.
Fig. 75 -CASE BACK
a
b
To Next Page
