20
NAV SET MODE
This unique Mode is described later in the manual in a separate
NAV MODE section (page 53).
NORM SET 1 MODE
To access NORM SET 1 Mode, press Both buttons simultaneously
for 2 seconds while viewing the SET NAV screen, release when
the SET 1 screen appears (Fig. 14).
NORM SURF MAIN >> SET NAV >> NORM SET 1 >> NORM SET 2 >> SN >> ASC
NORM SET 1 allows you to set/select the following items:
• Max Depth Alarm value
• NORM EDT (Elapsed Dive Time) Alarm value
• NORM Chrono or Ascent function
• Backlight Duration time
• NORM PO2 Alarm value
• NORM FO2 value (to be used)
• PC (to set up Upload/Download)
SET MAX DEPTH ALARM
Factory set for 120 M, the Max Depth Alarm can be set to values
of 6, 7, or 8 M (20, 23, or 26 FT); and between 9 M (30 FT) and
120 M (400 FT) in increments of 3 M (10 FT).
Fig. 14 - NORM SET 1
To Next Page
Loading...
Need help?
General
