To Next Page

To Previous Page

NAV DIVE MODE

When NAV Mode is set ON, the d.i.P will enter NAV Dive Mode

upon Descending to 0,6 M (2 FT) for 3 seconds and display the

NAV DIVE MAIN screen.

While operating in NAV Mode, EDT (Elapsed Dive Time) is con-

trolled (Started/Stopped) using the A (Advance/Left) button. It

also Starts automatically upon the first descent.

NAV SNs (Serial Numbers or Legs) are controlled using the S (Se-

lect/Right) button, which is also used to toggle the Backlight ON/

OFF in the Mode set (Constant or Time Out).

NAV DIVE MAIN (no dive yet, on Surface) -

After activation and Diagnostics, the following information is dis-

played (Fig. 67):

• Current Depth as 3 dashes (- - -) with M (or FT) icon

• Battery icon (if a Low Battery Condition exists)

• NAV SN Heading as 3 dashes (- - - o) with degrees graphic

• NAV SN CDT (Count Down Time) as 4 dashes (: - -: - -)

• EDT (Elapsed Dive Time) as 0:00 (hr:min)

• NAV SN as 2 dashes (- -)

The unit will automatically turn OFF 3 hours after activation if no

dive (descent) is started.

Fig. 67 - NAV DIVE MAIN

(no dive yet, on Surface)

HEADING

CDT

EDT

Fig. 68 - NAV DIVE MAIN

(EDT Started, on Surface)

EDT

Beuchat d.i.P User Manual

Questions and Answers: