Beuchat d.i.P User Manual

44
POST DIVE NORM SURFACE MODE
When you ascend to 0,6 M (2 FT), the d.i.P will display 3 dashes
for Current Depth, continue to display Max Depth and EDT
(Elapsed Dive Time) for that dive, and begin counting your Sur-
face Interval time.
FIRST 5 MINUTES
The first 5 minutes is, in affect, a Transition Period during which
time the following information is displayed (Fig. 47):
• Current Depth as 3 dashes with M (or FT) icon
• Max Depth of that dive with MAX icon
• Surface Interval Time (:min:sec)
• EDT (Elapsed Dive Time) of that dive (hr:min:sec)
• Battery icon (if a Low Battery Condition exists)
During the Transition Period, Chrono and Memo Mode can be ac-
cessed. No other modes (e.g., History, Set, PC) are accessible un-
til after being on the surface for a full 5 minutes.
> To access the Chrono (if set ON), then the Memo for that dive,
press/release the A (Advance/Left) button (< 2 seconds each
time).
> To activate the Backlight, press/release the S (Select/Right)
button (< 2 seconds).
Fig. 47 - POST DIVE
FIRST 5 MINUTES
EDT
SURFACE
INTERVAL

Beuchat d.i.P Specifications

General

Brand	Beuchat
Model	d.i.P
Category	Diving Instrument
Language	English