8
Depth Displays
During a dive, the Current Depth display (Fig. 2a), indicates
Depths from 0 to 120 M (400 FT) in 0,1 M (1 FT) increments or 1
M increments when greater than 99,9 M. The Maximum Depth
reached during that dive will be displayed during the first 5 min-
utes on the surface after a NORM (Normal) dive (Fig. 2b).
Time and Date Displays
Time displays are shown in hour:minute format (i.e., :02:36 repre-
sents 2 hours and 36 minutes, not 236 minutes!). The colons blink
twice per second when the display is indicating real time.
• Time of Day identified by the h icon (Fig. 3a) can be set for 12
hour format or 24 hour format.
Date is displayed only to identify dive data while it is viewed in
the Memo Mode.
• When Units of Measure are set for Metric, the Month appears to
the right of Day (Fig. 3b). When set for Imperial units, the
Month appears to the left of Day.
a
b
Fig. 2 - DEPTH DISPLAYS
Fig. 3 - DATE/TIME
a
b
To Next Page
Loading...
Need help?
General
