66
To exit NAV Mode and operate in NORM Mode:
> press/release the S (Select/Right) button (< 2 seconds) to toggle
NAV Mode from ON to OFF.
> press/release the A (Advance/Left) button (< 2 seconds) to save
the OFF setting and revert to the NORM SURF MAIN screen.
NOTE: Upon exit from NAV Mode to NORM Mode,
NAV EDT (Elapsed Dive Time) will reset to 0:00
(min:sec) and NAV SN (Leg) Headings and CDTs
(Count Down Times) will reset to the values at
which they were last set by PC Upload. Displayed
upon reentry into NAV Mode will be the NAV DIVE
MAIN Surface screen with dashes (Fig. 73).
NAV DELETE (Clear)
The d.i.P features a method that allows a diver to completely De-
lete (Clear) NAV EDT and all NAV Leg Heading/CDT informa-
tion that was uploaded from all screens (Fig. 74) and memory.
• At any time while operating in NORM Mode or in NAV Mode
when EDT is not running, depressing the A button for 20 sec-
onds will activate NAV Delete (Clear).
• While operating in NAV Mode with EDT running, depressing
the A button for 10 seconds will Stop EDT, then continuing to
maintain the A button depressed for an additional 20 seconds
will activate NAV Delete (Clear).
Fig. 73 - NAV DIVE MAIN
(after reactivation)
Fig. 74 - NAV DELETE
(during dive)
To Next Page
Loading...
Need help?
General
