60
SET UNITS OF MEASURE
This is the same function as the one in the NORM SET 2 menu.
Changing either will change the other.
Units of Measure can be set for Metric (M, C) or Imperial (FT, F).
To access the Set Units screen while viewing the SET NAV screen,
press/release the A (Advance/Left) button 4 times (< 2 seconds
each time).
• The graphic M (Meters) or FT (Feet), and the Temperature icon
and graphic C or F, flashing (Fig. 65A/B).
> Press/release the S (Select/Right) button to toggle between the
selections.
> Press/release the A (Advance/Left) button to accept the setting
and advance to SET NAV BACKLIGHT MODE, or press/hold
Both buttons for 2 seconds to revert to the SET NAV screen.
• Operation reverts to the NAV DIVE MAIN (Surface) screen in 2
minutes if no button is pressed.
Fig. 65B - SET UNITS OF
MEASURE (IMPERIAL)
Fig. 65A - SET UNITS OF
MEASURE (METRIC)
To Next Page
Loading...
Need help?
General
