To Next Page

To Previous Page

PC INTERFACE (UPLOADING SETTINGS, DOWNLOADING DATA)

Using a special linking Cable and a custom designed PC software program, dive data can be

Downloaded (copied) from the memory of your d.i.P to an IBM compatible PC program running

on a Microsoft

Windows® operating system.

The Program provides tabular and graphic profile data sampled throughout the dives. It also al-

lows Upload of NORM and NAV settings.

Instructions for use of the PC Interface Cable and Program are provided as the HELP portion of

the Program which is on the program CD. It should be printed and reviewed prior to attempting

either Download or Upload operations.

The Interface Cable will be connected to the Data Port located on the side of the d.i.P housing and

a USB port of the PC.

Refer to page 26 for access to the d.i.P's PC screen in NORM SET 1 Mode and page 58 for access

while in SET NAV Mode.

PC System Requirements:

IBM

, or compatible, Personal Computer with -

• Intel

Pentium 200 MHz or better microprocessor

• Microsoft

Windows

98 Second Edition, ME, NT, 2000, or XP

• CD Rom drive, USB Port, Mouse, Printer

• Super VGA card or compatible video graphics adaptor (256 color or greater) with a minimum

800 X 600 pixel screen area of display settings

• 20 MB of available hard drive storage and 16 MB of available RAM

Beuchat d.i.P User Manual

Questions and Answers: