59
SET MAX DEPTH ALARM
This is the same function as the one in the NORM SET 1 menu.
Changing either will change the other.
Max Depth Alarm can be set for 6, 7, or 8 M (20, 23, or 26 FT)
then 9 to 120 M (30 to 400 FT) in increments of 3 M (10 FT).
To access the Set Max Depth Alarm screen while viewing the SET
NAV screen, press/release the A (Advance/Left) button 3 times (<
2 seconds each time).
• The Max Depth Alarm value appears flashing with the M (or
FT) icon, Alarm icon A, Down Arrow with Bar icon, and
graphic dEEP. (Fig. 64).
> Press/release the S (Select/Right) button until the desired Alarm
value appears, or press/hold the button to scroll through the Set
Points at a rate of 4 Set Points per second.
> Press/release the A (Advance/Left) button to accept the setting
and advance to SET UNITS, or press/hold Both buttons for 2
seconds to revert to the SET NAV screen.
• Operation reverts to the NAV DIVE MAIN (Surface) screen in 2
minutes if no button is pressed.
Fig. 64 - SET MAX DEPTH
ALARM
To Next Page
Loading...
Need help?
General
