Beuchat d.i.P User Manual

11
POWER SUPPLY
The d.i.P utilizes one (1) type CR 2450 Lithium 3 volt cell that will
provide a minimum of 50 hours operation with the Backlight ON
constantly at 50% in NAV mode.
Battery Status Indication
The status of the Battery is displayed on an Altitude/Battery Status
screen that appears after Activation and the Diagnostic check.
If battery voltage is satisfactory (=> 2,75 volts), the graphics bAtt
and OP will be displayed (Fig. 5a/b).
If voltage is below 2,75 volts, the graphic bAtt will be displayed
with the Low Battery icon (flash symbol) that will continue to be
displayed in Surface Mode, flashing (Fig. 6a).
Low Battery Condition
Voltage level is checked upon activation and every minute during
operation on the surface.
• If a Low Battery Condition exists when the unit is activated (by
pressing a button), the Low Battery icon will appear flashing
once per second for 5 seconds followed by shutdown of the unit.
Fig. 5 - BATTERY STATUS
Fig. 6 - LOW BATTERY
(ACTIVATION)
a
b
a

Beuchat d.i.P Specifications

General

Brand	Beuchat
Model	d.i.P
Category	Diving Instrument
Language	English