18
NORM SURFACE MODE
NORM Surface Mode, identified by Temperature and Time of Day
being displayed, follows the Altitude/Battery Status screen after
Activation and the NORM Diagnostic and Altitude/Battery Status
screens.
NORM SURF MAIN, information includes (Fig. 11):
• If at Altitude Level 2 through 7, the Altitude icon (Mountains
symbol) will be displayed.
• Current Depth as 3 dashes with M or FT (no dive made yet),
Temperature and degrees icon with C or F, Time of Day
(hr:min) with the h icon, and Surface Interval Time (hr:min:sec)
as :00:00 (min:sec) until a dive is made.
NOTE: If the wet activation contacts are bridged,
the graphic H2O will appear in place of the Depth
(Fig. 12a). After the unit is rinsed and dried, the 3
dashes will replace the graphic H2O.
WARNING: If a Low Battery condition is displayed
after activation as indicated by the Low Battery
icon flashing (Fig. 13a), DO NOT attempt to dive
with the d.i.P until the Battery is changed.
Fig. 12 - SURF MAIN (unit wet)
Fig. 13 - SURF MAIN (Low BATT)
a
a
Fig. 11 - NORM SURF MAIN
a
To Next Page
Loading...
Need help?
General
