Beuchat d.i.P User Manual

55
Once NAV Mode is set ON, the d.i.P will remain in NAV Mode
until NAV Mode is set OFF. Upon reactivation or after selecting
NAV Mode ON, if it was previously set OFF, NAV Diagnostic
Mode will be displayed then NAV Pre Dive Surface Mode.
To set the NAV Mode ON (if previously set OFF):
While viewing the NORM SURF MAIN screen -
> press Both buttons simultaneously for 2 seconds to access the
SET NAV screen with the Set Point (OFF) flashing.
> press/release the S (Select/Right) button momentarily (< 2 sec-
onds) to toggle between OFF and ON (Fig. 58).
> press/release the A (Advance/Left) button momentarily (< 2
seconds) to accept the ON setting and access the NAV DIAG-
NOSTIC screen then the NAV DIVE MAIN (Surface) screen.
To set the NAV Mode OFF (if previously set ON):
While viewing the NAV DIVE MAIN Surface screen -
> press Both buttons simultaneously for 2 seconds to access the
SET NAV screen with the Set Point (ON) flashing.
> press/release the S (Select/Right) button momentarily (< 2 sec-
onds) to toggle between ON and OFF (Fig. 59).
> press/release the A (Advance/Left) button momentarily (< 2
seconds) to accept the OFF setting and access the NORM SURF
MAIN screen.
Fig. 58 - SET NAV (ON)
Fig. 59 - SET NAV (OFF)

Beuchat d.i.P Specifications

General

Brand	Beuchat
Model	d.i.P
Category	Diving Instrument
Language	English