BIFFI IMVS2000v2 - Page 58

September 2019
Installation, Operation and Maintenance Manual
MAN720_IMVS2000v2_IOM Rev. 6
MAN720_IMVS2000v2_IOM Rev. 6
MAN720_IMVS2000v2_IOM Rev. 6
Section 6: Conguration Parameters
Conguration Parameters
PARAMETERS OF THE “VIEW/SETUP MODE” MENU
PARAMETER NAME DESCRIPTION RANGE
DEFAULT
VALUE
R/W
(1)
AVAILABLE
ON (2) (3)
Al. OPCT En.
(Alarm OPCT Enabled)
Set as “No” it is disabled.
Set as “CFA” it is enabled and associated to the
“CFA St.”
Set as “ALR” it is enabled but not associated to
the “CFA St.”
See Sections 5.2.7, 8 and 5.2.3 for details.
CFA, ALR, No CFA R/W
Local, Serial,
Bus
Al. CLCT En.
(Alarm CLCT Enabled)
Set as “No” it is disabled.
Set as “CFA” it is enabled and associated to the
“CFA St.”
Set as “ALR” it is enabled but not associated to
the “CFA St.”
See Sections 5.2.7, 8 and 5.2.3 for details.
CFA, ALR, No CFA R/W
Local, Serial,
Bus
Al. FSCL En.
(Alarm FSCL Enabled)
Set as “No” it is disabled.
Set as “CFA” it is enabled and associated to the
“CFA St.”
Set as “ALR” it is enabled but not associated to
the “CFA St.”
See Sections 5.2.7, 8 and 5.2.3 for details.
CFA, ALR, No CFA R/W
Local, Serial,
Bus
Al. SOBT En.
(Alarm SOBT Enabled)
Set as “No” it is disabled.
Set as “CFA” it is enabled and associated to the
“CFA St.”
Set as “ALR” it is enabled but not associated to
the “CFA St.”
See Sections 5.2.7, 8 and 5.2.3 for details.
CFA, ALR, No CFA R/W
Local, Serial,
Bus
Al. FOBT En.
(Alarm FOBT Enabled)
Set as “No” it is disabled.
Set as “CFA” it is enabled and associated to the
“CFA St.”
Set as “ALR” it is enabled but not associated to
the “CFA St.”
See Sections 5.2.7, 8 and 5.2.3 for details.
CFA, ALR, No CFA R/W
Local, Serial,
Bus
Al. SOTT En.
(Alarm SOTT Enabled)
Set as “No” it is disabled.
Set as “CFA” it is enabled and associated to the
“CFA St.”
Set as “ALR” it is enabled but not associated to
the “CFA St.”
See Sections 5.2.7, 8 and 5.2.3 for details.
CFA, ALR, No CFA R/W
Local, Serial,
Bus
Al. FOTT En.
(Alarm FOTT Enabled)
Set as “No” it is disabled.
Set as “CFA” it is enabled and associated to the
“CFA St.”
Set as “ALR” it is enabled but not associated to
the “CFA St.”
See Sections 5.2.7, 8 and 5.2.3 for details.
CFA, ALR, No CFA R/W
Local, Serial,
Bus
Al. SCBT En.
(Alarm SCBT Enabled)
Set as “No” it is disabled.
Set as “CFA” it is enabled and associated to the
“CFA St.”
Set as “ALR” it is enabled but not associated to
the “CFA St.”
See Sections 5.2.7, 8 and 5.2.3 for details.
CFA, ALR, No CFA R/W
Local, Serial,
Bus
Al. FCBT En.
(Alarm FCBT Enabled)
Set as “No” it is disabled.
Set as “CFA” it is enabled and associated to the
“CFA St.”
Set as “ALR” it is enabled but not associated to
the “CFA St.”
See Sections 5.2.7, 8 and 5.2.3 for details.
CFA, ALR, No CFA R/W
Local, Serial,
Bus
Al. SCTT En.
(Alarm SCTT Enabled)
Set as “No” it is disabled.
Set as “CFA” it is enabled and associated to the
“CFA St.”
Set as “ALR” it is enabled but not associated to
the “CFA St.”
See Sections 5.2.7, 8 and 5.2.3 for details.
CFA, ALR, No CFA R/W
Local, Serial,
Bus
Al. FCTT En.
(Alarm FCTT Enabled)
Set as “No” it is disabled.
Set as “CFA” it is enabled and associated to the
“CFA St.”
Set as “ALR” it is enabled but not associated to
the “CFA St.”
See Sections 5.2.7, 8 and 5.2.3 for details.
CFA, ALR, No CFA R/W
Local, Serial,
Bus
54