set coordinate Y and confirm with .
The X coordinate must not be set because during printing the barcode is always
traced in the central position, based on the maximum number of characters per
line (characteristic for each single printer).
View customisation
Press to view the completed customisation.
All of the abbreviations used in the displayed data are provided below:
Data description
Dn1 where D = description and n1 = general data number
Data value
n2 where n2 = general data number
Barcode
Bn3 where B=barcode and n3 = selected barcode number
Coordinates (X,Y)
X = coordinate X Y = coordinate Y
Printing attributes
EV (VE) = Vertical expansion EO (HE) = Horizontal expansion S = Single
D = Double
TC = Type of character
N = Normal
G (B) = Bold
C (I) = Italics
S (U) = Underlined
R = Reverse
G (J) = Justification
S (L) = Left
D (R) = Right
Press for a print preview: the entered data can be printed before confirming
customisation.
If the terminal is legal, printing must only be carried out if the required data has
been entered. Press HELP to view this data.
With DEL it is possible to delete a selected element from customisation and with
ESC you can go back to the customisation functions.
When all of the data has been entered, press SAVE to exit the customisation
function and save the completed customisation.
Press ESC to exit the customisation function without saving.
To Next Page
Loading...