5.2.15 Progressive number
The terminal manages a 6-digit progressive number used to count the
number of weighing operations performed: this value starts from 1 and is
automatically increased by one unit after each print and/or weighing
operation (and thus indicates the value of the next print or weighing
operation). To change the progressive number, follow the pathway:
...>MENU>Data management>Progressive
(Shortcut key PROG.N )
If the progressive number is set to 0 (zero), it will not be incremented
and not be printed.
5.2.16 Coefficient Management
This function can be of use when the unit of measurement needs to be
converted. for example, you can calculate the number of litres if the
specific weight and overall weight of a liquid are known.
Follow the following path to access this menu:
...>MENU>Data Management>Coefficient Management
(COEF rapid key)
Enter the required coefficient, then select the required type of
operation (multiplication or division) and the rounding value for the
result. This latter is just a numerical value without unit of measurement.
D410
1-49
To Next Page
Loading...