Bilancial D410 - Entering Numeric Data (Editor); Entering Alphanumeric Data

5.1.2 Entering numeric data (Editor)
Numeric values may be entered as follows:
✔
select the function for which you wish to enter the value (preset tare,
settings, range...); the display will show the selected function with the
value currently stored in memory;
✔
enter the value using the numeric keys ( par. 4.3 on page 1-33 )
✔
press to confirm the value and return to the previous menu.
5.1.3 Entering alphanumeric data
Alphanumeric data may be entered as follows:
✔
Select a function for which an alphanumeric value may be entered
(e.g. the generic code);
✔ press the keys corresponding to the letters you want to enter;
✔
press to confirm.
bear in mind that:
✔
pressing the same key repeatedly displays each of the letters, the
number and the special characters associated with that key in
sequence;
✔
to confirm the letter displayed, simply press, simply press another
alphanumeric key;
✔ to enter two consecutive letters using the same key, wait a second
before pressing the key again: the correct position will be indicated by
the cursor;
D410
1-38