5.2.2 Adjusting the contrast
To adjust the contrast of the display, follow the pathway:
...>MENU>Contrast
(Shortcut key CONTR).
By pressing + or - you can adjust the contrast. To save the new setting
in memory press SAVE .
5.2.3 Changing the date and time
Follow the pathway:
...>MENU>Date Time
(Shortcut key DATIME).
To change quickly from summer to winter time press + or - 1 hour,
alternatively use the option CHANGE .
5.2.4 Weight display
You can change the way the weight value is displayed on the terminal.
The current weight display mode will depend on the operation type set
during installation (see par. 5.4 on page 1-54 ).
To select the display mode follow the pathway:
...>MENU>Display
(Shortcut key VISUAL).
The possible display modes are:
✔ 15mm digits
The display shows the gross weight (or net) and the weighing
symbols.
✔ 30mm digits
The display shows the weight in 30 mm high digits and the weighing
symbols.
D410
1-42