5.3 Printing weighing data
The printer is normally connected to the terminal by way of the COM1
serial port ( par. 6.8 on page 1-76 ).
Printouts are obtained by pressing . Printing is performed if:
✔ the weight is valid, i.e. it is not less than zero and does not exceed
the maximum scale capacity;
✔ the weight is stable;
✔ the printer is connected, switched on, there are no other print jobs
currently in progress and there is paper in the printer.
The following data are printed:
✔
Date and time (if enabled)
✔ Progressive number
✔
product code (if selected) with the relative alphanumeric description
✔
Generic code (if selected)
✔
Gross (if enabled)
✔
Tare/s (if present)
✔ Net
✔
Coefficient and result (if enabled)
If the relative function is enabled, the product code and net weight may
be printed in the form of a bar code.
The printout can be customised using a PC and a specific programme:
for further information, contact your dealer.
For details regarding printing characteristics, paper format, printer
maintenance etc., see the instruction manual for your printer.
D410
1-52
To Next Page
Loading...