6.6.4 Checking memorised weight data
To check the data saved in memory, press the shortcut key COD MPP.
The terminal displays the net weight and the tare associated with the
MPP identification code of the last weighing operation to be performed.
By pressing SETCOD you can call up previous weighing operation data
by entering the relative code number (see par. 5.1.2 on page 1-38 ).
If the terminal is equipped with a printer, by pressing you can print
the weight data displayed and the relative identification code.
The MPP terminal number or serial number may appear in the print
heading, depending on the type of response selected during the
installation phase.
D410
1-73
To Next Page
Loading...