BD / ED / FD (E2) 11/2010 page 36/54
10. Disposal
10.1 Disposal of the transport packing
Packing element Material Disposal
Straps to fix packing on pallet Plastic Plastic recycling
Non-wood (compressed
matchwood, IPPC standard)
Wood recycling Wooden transport box (option)
with metal screws
Metal Metal recycling
Pallet (from size 115 on)
with foamed plastic stuffing (from
size 240 on)
Solid wood (IPPC standard) Wood recycling
Cardboard Paper recycling Transport box
with metal clamps
Metal Metal recycling
Cardboard Paper recycling Removal
aid (sizes 240
and 400 only)
Plastic Plastic recycling
Edge protection Styropor
®
or PE foam Plastic recycling
Protection of doors and racks PE foam Plastic recycling
Bag for operating manual PE foil Plastic recycling
Insulating air cushion foil (packing of
optional accessories)
PE foil Plastic recycling
If recycling is not possible, all packing parts can also be disposed of with normal waste.
10.2 Decommissioning
Turn off ED units sizes 400 and 720 at the main power switch (10). Disconnect the unit from the power
supply.
When turning off the main power switch ON / OFF (10), the stored parameters remain saved.
• Temporal decommissioning: See indications for appropriate storage, chap. 3.3.
• Final decommissioning: Dispose of the unit as described in chap. 10.3 to 10.5.
10.3 Disposal of the unit in the Federal Republic of Germany
According to directive 2002/96/EC of the European Parliament and of the Council on waste electrical and
electronic equipment (WEEE), BINDER devices are classified as “monitoring and control instruments”
(category 9) only intended for professional use“. They must not be disposed of at public collecting points.
The incubators BD and heating ovens ED and FD bear the symbol for the marking of
electrical and electronic equipment manufactured / placed on the market in the EC after 13
August 2005 and be disposed of in separate collection according to the directive
2002/96/EC on waste electrical and electronic equipment (WEEE) and German national
law for electrical and electronic equipment (Elektro- und Elektronikgerätegesetz, ElektroG).
WEEE marking: crossed-out wheeled bin with solid bar under. A significant part of the
materials must be recycled in order to protect the environment.
To Next Page
Loading...
