BD / ED / FD (E2) 11/2010 page 48/54
12.9 Equipment and Options Series FD
To operate the heating oven FD, use only original BINDER accessories or accessories /
components from third-party suppliers authorized by BINDER. The user is responsible for any
risk arising from using unauthorized accessories.
Unit size FD 23 FD 53 FD 115 FD 240
Standard equipment
Microprocessor temperature controller with LED display,
timer function, and ramp function
Temperature safety device cl. 2 acc. to DIN 12880
Exhaust duct, internal diameter 50mm / 1,97 inches, with
adjustable ventilation slide
Options / accessories
Rack, chrome-plated or stainless steel
Perforated rack, stainless steel
Reinforced rack stainless steel, with 1 set rack lockings -- -- --
Access ports with various diameters, with silicone plug
Lockable door
Door with window and interior lightning
FKM door gasket (temperature resistant up to 200 °C)
Rubber pads for safe stacking (4 pieces)
--
Temperature safety device class 3.1 acc. to DIN 12880
Analog output 4-20 mA for temperature with 6 pole DIN
socket, DIN plug included
Disconnectable audible over-temperature alarm
Pen recorder, external
Factory calibration certificate
Extension to factory calibration certificate (additional
value)
Qualification folder
Unit acc. to CUL standard in 115 V 1N~60Hz
--
Unit acc. to CUL standard in 208 V 3N~60Hz -- -- --
Evaporating dish with rim, small or large
Instrument tray with lid, small or large
Neutral cleaning agent (liquid concentrate)
Stable table on wheels with castors and locking brakes --
Legend: Standard equipment Optional -- Not available
To Next Page
Loading...
