MKF / MKFT (E5) 04/2022 page 12/176
1.6 Type plate
The type plate sticks to the left side of the chamber, bottom right-hand, above the refrigerating and humidity
module.
Figure 2: Type plate (example of MKFT 240 regular unit)
Indications of the type plate (example)
Manufacturer: BINDER GmbH
Alternating climate chamber
Serial no. of the chamber
Nominal temperature
Nominal temperature
IP type of protection acc. to standard EN 60529
Temperature safety device acc. to standard DIN 12880
Class of temperature safety device
Optional: Special application acc. to project no.
400 V / 50 Hz
Nominal voltage +/- 10% at the indicated power fre-
quency
Max operating pressure 29 bar
Max operating pressure in the refrigerating system
Stage 1: R 452A - 2,20 kg
Cooling 1
st
stage: Refrigerant type, filling weight
Cooling 2
nd
stage: Refrigerant type, filling weight
Contains fluorinated greenhouse gases covered by the Kyoto Protocol
Symbols on the type plate
CE conformity marking
Electrical and electronic equipment manufactured /
placed on the market in the EU after 13 August 2005
and be disposed of in separate collection according to
the Directive 2012/19/EU on waste electrical and elec-
tronic equipment (WEEE).
Max. operating pressure 29 bar
Stage 1: R 452A – 2,20 kg
Contains fluorinated greenhouse gases
covered by the Kyoto Protocol
Alternating climate chamber
Im Mittleren Ösch 5
78532 Tuttlingen / Germany
E5
Serial No. 00000000000000
Made in Germany