MKF / MKFT (E5) 04/2022 page 138/176
23.4 Sending the chamber back to BINDER GmbH
If you return a BINDER product to us for repair or any other reason, we will only accept the product upon
presentation of an authorization number (RMA number) that has previously been issued to you. An au-
thorization number will be issued after receiving your complaint either in writing or by telephone prior to
your sending the BINDER product back to us. The authorization number will be issued following receipt of
the information below:
• BINDER product type and serial number
• Date of purchase
• Name and address of the dealer from which you bought the BINDER product
• Exact description of the defect or fault
• Complete address, contact person and availability of that person
• Exact location of the BINDER product in your facility
• A contamination clearance certificate (chap. 27) must be faxed in advance
The authorization number must be applied to the packaging in such a way that it can be easily recognized
or be recorded clearly in the delivery documents.
For security reasons we cannot accept a chamber delivery if it does not carry an authoriza-
tion number.
Abteilung Service
78502 Tuttlingen
24. Disposal
24.1 Disposal of the transport packing
Straps to fix packing on pallet
Wooden transport box (option)
with metal screws
Non-wood (compressed
matchwood, IPPC standard)
Wood recycling
Pallet
with foamed plastic stuffing
Solid wood (IPPC standard)
Shipping box
with metal clamps
®
Protection of doors and racks
Upholstered transport piece
(L-type profile) for door support
Steel or aluminum with plastic
Keep it for transportation purpose.
Disposal: Metal recycling
Insulating air cushion foil (pack-
ing of optional accessories)
PE foil Plastic recycling
If recycling is not possible, all packing parts can also be disposed of with normal waste.
To Next Page
Loading...
