Binder MKF 400 - Page 147

MKF / MKFT (E5) 04/2022 page 147/176
Chamber size
115
240
720
Climatic data (with humidity)
Temperature range
°C
°F
+10 to +95
50 to 203
+10 to +95
50 to 203
+10 to +95
50 to 203
Temperature range
with optional compressed air dryer
°C
°F
0 to +95
32 to 203
0 to +95
32 to 203
0 to +95
32 to 203
Temperature fluctuation
± K
0.1 to 1.0
0.1 to 1.5
0.1 to 1.0
Humidity range
% r.h.
10 to 98
10 to 98
10 to 98
Humidity range with optional compressed air dryer
% r.h.
5 to 98
5 to 98
5 to 98
Humidity fluctuation
± % r.h.
≤ 2.5
≤ 2.5
≤ 2.5
Dew point temperature range
°C
°F
+5 to +94
41 to 201
+5 to +94
41 to 201
+5 to +94
41 to 201
Dew point temperature range
with optional compressed air dryer
°C
°F
-28 to +94
-18.4 to 201
-28 to +94
-18.4 to 201
-28 to +94
-18.4 to 201
Max. heat compensation at 25 °C
/ 77 °F
and 90 %
r.h. (without optional compressed air dryer)
W 400 400 800
Electrical data
IP-system of protection acc. to EN 60529
IP
20
20
20
Nominal voltage (+/-10%) at 50 Hz power frequency
V
400
400
400
Current type
3N~
3N~
3N~
Power frequency
Hz
50
50
50
Nominal Power
kW
6.20
7.50
13.00
Power plug
CEE plug
5-poles
16 A
CEE plug
5-poles
16 A
CEE plug
5-poles
32 A
Over-voltage category acc. to IEC 61010-1
II
II
II
Pollution degree acc. to IEC 61010-1
2
2
2
Over-current release category B, 3 x internal
Amp
16
16
25
Electrical data of the voltage and frequency changer
IP-system of protection acc. to EN 60529
IP
23
23
23
Nominal voltage (+/-10%) at 60 Hz power frequency
(input side)
V 480 480 480
Current type
3N~
3N~
3N~
Nominal power
kW
9
9
13
Over-voltage category acc. to IEC 61010-1
II
II
II
Pollution degree acc. to IEC 61010-1
2
2
2
Fuse
A
16
16
25
Environment-specific data
Noise level (mean value)
dB(A)
62
65
69
Noise level with optional compressed air dryer
(short-term) (mean value)
dB(A) 85 85 85
Noise level with voltage and frequency changer
(mean value)
dB(A) 67 67 67
Energy consumption at +25 °C / 77 °F and
60 % r.h.
Wh/h 1000 1400 2200
Filling weight of refrigerant R 452A
(1
st
stage cooling, GWP 2140)
kg / lbs. 1.60 / 3.53 2.20 / 4.85 4.00 / 8.82
Filling weight of refrigerant R23
(2
nd
stage cooling, GWP 12100)
kg / lbs. 0.32 / 0.71 0.40 / 0.88 0.87 / 1.92
Note: Chambers with voltage and frequency changer: Average heating up time reduced by 0.3 K/min each.
All technical data is specified for unloaded chambers with standard equipment at an ambient temperature
of +22 °C +/- °C / 71.6 °F +/- 5.4 °F and a power supply voltage fluctuation of +/-10%. Technical data is
determined in accordance to BINDER Factory Standard Part 2:2015 and DIN 12880:2007.