Binder MKF - Event List Overview

MKF / MKFT (E5) 06/2020 page 108/176
15.3 Event list
The “Event list” displays status information and errors of the current day. It enables to view the last 100
events or defective conditions of the chamber.
Press the Event list icon to access the event list from Normal display.
Event list
Press the Update icon to update the event list.
Attention: Following a modification of the language setting (chap. 14.1) or the storage inter-
val of the chart recorder (chap. 16.2) the Event list is cleared.
15.4 Technical chamber information
Path: Main menu > Device info
Chamber name and setup
Versions of CPU, I/O module and safety con-
troller
for BINDER
Service
Information on digital and analog inputs and
outputs and phase angle outputs
for BINDER
Service
Information on modbus analog and digital
inputs
for BINDER
Service
Information on Ethernet connection, MAC
address display
chap. 14.5.2
Back to main menu