Binder VD 23 - Creating a New Week Program

VD (E3.1) 03/2020 page 115/173
16.3 Creating a new week program
Path: Main menu > Programs > Week program
“Week program” menu:
overview of the existing programs.
Select an empty program place.
Enter the program name and, if desired,
additional program information in the
corresponding fields.
Select the set-point course “Ramp” or “Step”
(chap. 16.6.1).
Press the Confirm icon. The program view
opens.
Program view.
For the first section no weekday is specified.
Therefore the section is first marked in red
and cannot be saved.
Error message when attempting to save the
program
To enter the values, select the program section which is marked in red. You will have access to the
Section view where you can enter the values of the selected section (chap. 16.6).