Binder VD 23 - Weekday; Start Time; Setpoint Entry

VD (E3.1) 03/2020 page 121/173
16.6.2 Weekday
Section view.
In the field “Weekday” select the desired weekday.
With “Daily” selected, this section will run every day
at the same time.
16.6.3 Start time
Section view.
Select the field “Moment”.
Entry menu “Moment”.
Select with the arrow keys the desired start
moment of the section and press the Confirm
icon.
16.6.4 Setpoint entry
Section view.
•
Select the field “Temperature” and enter the
desired temperature setpoint.
Setting range: 0.0 °C up to 220.0 °C
Confirm entry with Confirm icon. The controller
returns to the section view.
• Select the field “Pressure” and enter the desired
pressure setpoint.
Setting range: 0 mbar up to 1100 mbar
Confirm entry with Confirm icon. The controller
returns to the section view.